Handheld type fiber laser marking machine
The fiber laser marker has a homogeneous structure, any optical soiling, any power coupling losses and it has an air cooling system. In contrast to other laser machines, this laser machine has a high efficiency and reliability. Efficiency and a long duration of usage are the main arguments for customer's choice and usage of this optical fiber laser marking machine.
The laser beam has an excellent quality: In comparison with traditional laser marking machines, the laser marking machines of series SW-FLM have the absolute superiority. The output for the base mould is focused with a facular diameter less than 20nm. The divergence angle is ¼ of the semiconductor pump laser. Especially suitable for precise and extremely precise laser marking:
Low running costs
The electrical light transfer efficiency achieves 30% most greatly; the energy consumption is less than 800W, which is 1/10 by the lamp during laser marking pumped solids. The long-term use may save a lot of disbursement of the users.
This laser machine has a long duration of life
The fiber laser marking machines uses two levels of tube achievement for pump source. This machine uses a unique pump coupling technology and its averaged working time amount to 100,000 hours. This laser machine has an exquisite volume and it is suitable for adverse circumstances: The optical fiber laser machine has an extremely flexibility, designs extremely nimble and has a compact design. The glass fiber surface area / volume ratio is high and has a good effect of radiation. It is not necessary to use an enormous water cooling system - an air cooling system is sufficient. Even if attacking high, high vibration, high temperature, dust and other adverse circumstances, this laser machine continue normal work. Exempts the maintenance operation.
The optical fiber laser markers feature high efficiency in electrical/optical conversion, and wind cooling is employed. The whole system is small in size, with high beam output quality, high reliability, super long service life, and saving energy.
1.Small size with less power consumption;
2.High speed scanner head;
4.Long lifetime:life expectancy is 100,000 hours;
6.Red light preview:show the marking position before marking.
7.Compact structure, compact and light, simple interface, flexible and adjustable processing direction, easy to control
Applicable materials and industries
Used to engrave metallic and non-metallic materials, for example, stainless steel decorating parts for handsets, clocks, watches, moulds, ICs, handset buttons, etc. The markers are able to engrave beautiful images on metallic and plastic surfaces.
|Laser Repetition frequency||20-100KHz|
|Marking size optional||50x50mm,150x150mm,175x175mm,200x200mm,300x300mm|
|Min. line width||0.01mm|
|Supported format||Support AI,PLT, DXF, BMP,JPG file|
|Power supply||AC220V±10%/50Hz-60Hz, AC110V optional.|
|Laser cooling||Air cooling|