How To Improve The Marking Efficiency Of Fiber Laser Marking Machine
Fiber laser marking machine is designed to bring higher productivity and create higher value, then how to improve the fiber laser marking machine marking speed? Now, the marking technologist of Shenzhen Superwave Laser Technology Co., Ltd. to introduce for you.
First, the impact of fiber laser marking machine is divided into internal factors and processing of two aspects of the workpiece.
Internal factors mainly for the laser frequency, laser beam mode and beam divergence angle, laser power, reasonable optical shaping with the processing of auxiliary gas substances. Internal factors mainly in the early models when the allocation of attention, should follow the advice of laser engineers to buy. Another factor is the need for customers to pay attention to the processing, mainly for the marking density, marking the format, marking the depth and laser spot size.
Second, marking density.
In the same format, the same spot, the same depth of the case, the higher the density of marking, the corresponding marking speed will be slower, the reason for the density directly increase the marking area.
Third, marking the format
Because the large format marking galvanometer deflection area increased, so large format marking speed than the small format marking speed is slower.
Fourth, marking the depth.
According to the demand, if the depth of the marking to deepen the need for fiber laser marking machine parameters to adjust the fiber laser marking machine power, current and other factors, so in these processes will affect the marking speed.
Fifth, the laser spot size
The smaller the spot, the smaller the marking volume, so the bigger the spot, the faster the marking.