Laser welded joints are of high strength and resist even high mechanical strain without any wear. Other than adhesive seals, they are temperature-resistant and show pore-free surfaces. Compared to other joining techniques, post processing of laser weld is reduced to only a few simple steps,or can be ignored completely.
Perfect welds – even in complicated areas
Spot-accurate positioning and visual control via stereo microscope
3.Minimal heat input
No distortion, no damage to temperature-sensitive components
Weld seams smaller than 50 microns with high pulse-to-pulse stability
5.Filigree and robust
Welds of 50 micron to 2 mm seam depth
Spot, seam, overlap and deposit welding
By matching the parameters and shape of the laser pulses to each material,the laser generates a minimal heat affected zone, thus meeting the precondition for welding temperature-sensitive components.Another positive effect of the low thermal load of the two parts is, that unwanted modifications of the joint by the welding process can almost always be avoided.
1. Smaller size, save space.
2. Internal water to air cooling. No shake.
3. High performance laser beam quality, flat-top laser beam shape. No spatter, no dark, smooth spot.
4. High stability laser energy output.
5. Stable power supply system ensure 24hours running.
6.The energy, pulse width, frequency and light spot size can be adjusted in a large range to realize different welding effects.
Peak pulse power
Pulse frequency max
Internal cooling system
Stereo microscope 10X,CCTV camera system optional
AC220V/1Ph/50Hz or 60Hz.16Amp