The laser cutting machine is customized for imported laser source and cutting heads according to the jewelery industry, as well as excellent quality of laser beam,suitable for cutting pure gold, 9K-24K gold, 925 silver, sterling silver and other precious metals.These metals are highly reflective materials for laser beams, low laser absorptivity, strong reflectivity, and can not be processed by ordinary laser devices.Unique optical design, adding high-reflective laser isolator, makes our SW-FLC800-Gold series of laser cutting machine can easily cut pure gold, silver and other high-reflective material, and not easy to damage the laser.
High-precision jewelry laser cutting system combine the integration of the layout with sorting function.Cutting fine,and the material can be used of maximization.At the same time making the loss greatly reduced.The cutting system supports: DXF, AI, PLT and other commonly used drawing format, support crossed, lettering function.Also you can choose the rotating shaft, and then this material(like bracelets, rings, round pipe and so on) could be cut easily.
1.Focusing the cutting head automatically.using of imported high-progress capacitive sensor, full-time dynamic tracking plate height.Adjusting the cutting height automatically that prevent the collision, you can cut the uneven plate.
2.Cutting machine adopts imported servo motor drive, import high-precision linear module, fast, high precision up to 0.01mm.
3. The use of advanced fiber laser source, the core devices are imported,long service life.
4.High stability,no supplies, maintenance-free.
Fiber laser cutting machine is the newest generation laser cutting system, the fiber laser source is low energy consumption and high efficiency laser generator. The user no need do laser alignment of the laser resonator, the laser source is very high service life up to 50000 hours. And maintenance free.
1.cutting line width, up to 0.04-0.08mm. Use the appropriate auxiliary gas, making the slits neat and smooth, do not need secondary polishing.
2.For gold and silver jewelry industry professional custom laser cutting system, with path optimization, cutting starting point optimization, multi-layer, layout function, save time and material.
3.Small size, low energy consumption, less supplies, easy maintenance. With compressed air can also be cut, low cost.
4.supports DXF, AI, PLT and other commonly used drawing format.
|Laser source||Fiber laser source|
|Cutting size range||200mm x 300mm|
|Z axis of cutting head||120mm travel distance with auto-focus system|
|Repeat positioning accuracy||±0.02mm|
|Mains||220V Single phase,50 or 60Hz|
|Cutting thickness(brass)||Less than 2mm||Less than 3mm||less than 4mm|