SW-FLM Fiber Laser Marker Series-Superwave Laser Marking Machine

May 10, 2018
SW-FLM Fiber Laser Marker Series-Superwave Laser Marking Machine

Product Introduction

The fiber laser marker has a homogeneous   structure, any optical soiling, any power coupling losses and it has an air   cooling system. In contrast to other laser machines, this laser machine has a   high efficiency and reliability. Efficiency and a long duration of usage are the   main arguments for customer's choice and usage of this optical fiber laser   marking machine.

Essential features
The laser beam has an excellent quality: In   comparison with traditional laser marking machines, the laser marking machines   of series SW-FLM have the absolute superiority. The output for the base mould is   focused with a facular diameter less than 20nm. The divergence angle is ¼ of the   semiconductor pump laser. Especially suitable for precise and extremely precise laser marking:

Low running costs:
The electrical light transfer efficiency   achieves 30% most greatly; the energy consumption is less than 800W, which is   1/10 by the lamp during laser marking pumped solids. The long-term use may save   a lot of disbursement of the users.

This laser machine has a long duration of life:
The fiber laser marking machines uses two   levels of tube achievement for pump source. This machine uses a unique pump   coupling technology and its averaged working time amount to 100,000   hours. This laser machine has an exquisite volume and   it is suitable for adverse circumstances: The optical fiber laser machine has an   extremely flexibility, designs extremely nimble and has a compact design. The   glass fiber surface area / volume ratio is high and has a good effect of   radiation. It is not necessary to use an enormous water cooling system - an air   cooling system is sufficient. Even if attacking high, high vibration, high   temperature, dust and other adverse circumstances, this laser machine continue   normal work. Exempts the maintenance operation.

Data Sheet:

ModelSW-FLM Fiber laser marker   series
Mean laser power10W;20W;30W;50W
Laser wavelength1064nm
Laser Repetition frequency20-100KHz
Marking area110×110mm
Marking size optional50x50mm,70x70mm,150x150mm,175x175mm,200x200mm
Marking depth=0.8mm
Linear speed=10000mm/s
Min. line width0.01mm
Min. letter0.2mm
Supported formatSupport AI,PLT, DXF, BMP,JPG file,   etc.
Power supplyAC220V±10%/50Hz-60Hz, AC110V   optional.
Power consumption0.8KW
Laser coolingAir cooling
Host dimension(L*W*H)1200x630x1400mm

marking sample