The Use And Maintenance Of Fiber Laser Cutting-superwave Laser Machine

Fiber laser cutting machine in the classification of mechanical belong to high-tech large machines, this machine at the time of purchase price is very high, and in the process of using professional requirements for technical staff is also very high, so we in the process of using mechanical must often for mechanical processing and maintenance, so as to prolong the service life of machine. Today, the technical engineer of the laser technology will share with you the use and maintenance skills of this machine.

1. Keep the steel belt tight at all times

Steel strip in the operation of laser cutting machine has played a very important role in the transmission, and the material of the this kind of steel strip it belongs to the steel, the steel in the process of use, if not taut, could easily lead to be cut and be left out of orbit, and even the phenomenon of steel belt and slip may be produced, so the threat to the safety of the staff had a great, so no matter when and where, must keep the steel strip is in a state of tension, so as to the safety of construction personnel play a protective role.

2. Check the Angle of tools frequently

Because in the components of the optical fiber laser cutting machine, the most important parts is cutting machine, if there's a certain deviation in the Angle of the cutter, then in the process of cutting will easily lead to the precision of cutting items finally not so accurate.

3. Often dust the inside of the machine

Due to the laser cutting machine in cutting goes directly to the metal surface evaporation, so on the surface of cutting machine and internal often can produce a lot of dust, we should often will use vacuum cleaner to suck out the dust, so as to ensure the mechanical spotless, between the internal parts in this way can ensure parts between can normal operation.

4. The parts should be lubricated frequently

We need to lubricate the rack, guide rail and many of the parts of the cutting machine at irregular intervals so that they can ensure that the gear is occlusive in operation. In this way, the mechanical operation will be in the normal operating orbit, and the product precision will be higher.

fiber laser cutting machine.jpg